Dolphin Floor Adhesive

Applications Area:

• Multi-Purpose Floor & PVC Vinyl Adhesion
• Bonding of PVC sheet, Vinyl coverings and tiles, EPDM sheet, Polystyrene board, PU foam and similar material with concrete, metals and wooden substrates
• Bonding substrate with porous and non-porous surfaces
• Floor heating installations. However, the heating should be switched off at least 48 hours before and after the installation of floor coverings.

Application Instructions:

Application surface should be dry and dust, rust, and grease-free. Stir well before use. Apply the adhesive uniformly on the substrate using a fine trowel, brush or roller and wait for 15-20 minutes for adhesive to become tacky and then lay the floor covering. Bonding over existing floor coverings should be avoided. Clean any excess adhesive with water immediately.

Storage & Shelf-Life:

12 months in unopened packaging in a dry and cool storage place, at temperature +30°C or below. Do not store in direct sunlight.

Safety Instructions:

Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

Packaging: