Dolphin PU Foam 100

Dolphin PU Foam 100 is a one-component, self-expanding, ready to use polyurethane foam, which contains HCFC- and CFC-free propellants who are not harmful for the Ozone layer.



  •  Installing of window and door frames
  •  Filling of cavities
  • Sealing of all openings in roof constructions
  • Apply a soundproof layer improving thermal isolation in cooling systems


  • Excellent stability (no shrinkage or post-expansion)
  • High filling capacity
  • High insulation value, thermal and acoustic
  • Good adhesion on all surfaces (except PE, PP and PTFE)
  • Very good bonding properties
  • Very precise to dose
  • Not UV-resistant
  • Freon free (not harmless to ozone layer and greenhouse effect)

Application Instructions:

  • Shake the aerosol can for at least 20 seconds. Fit the gun on the adapter
  • Surface should be free from grease and dust
  • Moisten surfaces with a water sprayer prior to application
  • For non-conventional substrates a preliminary adhesion test is recommended
  • Fill holes and cavities for 65 %, as the foam will expand
  • Repeat shaking regularly during application. If you must work in layers repeat moistening after each layer
Sr. No Volume Packaging Type
1. Can temperature +5 °C – 30 °C
2. Ambient temperature +5 °C – 30 °C
2. Surface temperature +5 °C – 35 °C

Storage & Shelf-Life:

12 months unopened and stored in dry and cool conditions (Between 5 and 25 °C), Upright storage is recommended.
Do not place in direct sunlight or nearby any heat, sparks, and flame source.

Health & Safety Recommendations :

Take the usual labor hygiene into account. Always wear gloves and goggles. Remove cured foam mechanically.
Never burn away. Consult label and material safety data sheet for more information. When vaporizing (for
example with a compressor), additional security measures will be required. Use only in well ventilated areas.


Physical properties shown are typical and are to serve only as guide for engineering design. Results are obtained
from specimens under ideal laboratory conditions and may vary upon use, temperature, and ambient conditions.
Right to change physical properties because of technical progress is reserved. This information supersedes all
previously published data. Yields shown are based on theoretical calculations and will vary depending on ambient
conditions and particular application. Read all product direction and safety information before use. Consult local
building codes for specific requirements regarding the use of cellular plastics or urethane products in construction.


Sr. No Volume Packaging Type
1. Dolphin PU Foam 100  750 ml aerosol (net)
Marhaba       مرحبا

Welcome to Al Muqarram. Nice to meet you. Speak to SABA or MARK for your inquires.