Floor
Adhesive

Dolphin Floor Adhesive is based on premium quality synthetic resin, additives, tackifier, and fine grade mineral fillers. It is acrylic water-based adhesive and compatible with most of the substrates.

TDS  |   MSDS

Description

Applications Area

  • Multi-Purpose Floor & PVC Vinyl Adhesion
  • Bonding of PVC sheet, Vinyl coverings and tiles, EPDM sheet, Polystyrene board, PU foam and similar material with concrete, metals and wooden substrates
  • Bonding substrate with porous and non-porous surfaces
  • Floor heating installations. However, the heating should be switched off at least 48 hours before and after the installation of floor coverings.

Storage

12 months in unopened packaging in a dry and cool storage place, at temperature +30°C or below. Do not store in direct sunlight.

Instructions

Application surface should be dry and dust, rust, and grease-free. Stir well before use. Apply the adhesive uniformly on the substrate using a fine trowel, brush or roller and wait for 15-20 minutes for adhesive to become tacky and then lay the floor covering. Bonding over existing floor coverings should be avoided. Clean any excess adhesive with water immediately.

Safety Instructions

Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

Packaging

Sr. NoVolumePackaging Type
1.5kgBucket
2.10kgBucket
3.25kgBucket
4.200LtrDrum

Description

Applications Area

  • Multi-Purpose Floor & PVC Vinyl Adhesion
  • Bonding of PVC sheet, Vinyl coverings and tiles, EPDM sheet, Polystyrene board, PU foam and similar material with concrete, metals and wooden substrates
  • Bonding substrate with porous and non-porous surfaces
  • Floor heating installations. However, the heating should be switched off at least 48 hours before and after the installation of floor coverings.

Storage

12 months in unopened packaging in a dry and cool storage place, at temperature +30°C or below. Do not store in direct sunlight.

Instructions

Application surface should be dry and dust, rust, and grease-free. Stir well before use. Apply the adhesive uniformly on the substrate using a fine trowel, brush or roller and wait for 15-20 minutes for adhesive to become tacky and then lay the floor covering. Bonding over existing floor coverings should be avoided. Clean any excess adhesive with water immediately.

Safety Instructions

Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

Packaging

Sr. NoVolumePackaging Type
1.5kgBucket
2.10kgBucket
3.25kgBucket
4.200LtrDrum