Dolphin – Fire Stop Silicone Sealant

Dolphin Fire Stop Silicone Sealant is a single component, neutral cure, gun-grade fire stopping sealant. It is an elastomeric, high performance sealant capable of meeting the joint movement requirements in a fire-rated joint. Dolphin Fire Stop is tested for up to 4 hours fire rating at independent laboratories and is approved for both through penetrations and joint applications.

TDS    |    MSDS

Applications Area:

– Steel, Copper and EMT Pipes
– Fiberglass pipe insulation

Construction joints:

– Cables Building Assemblies
– Concrete and CMU
– Gypsum Wallboard

Application Instructions:

Application surface should be dry and dust, rust and grease-free. Cut the nozzle at an angle of 45° and apply sealant on a substrate. Tool immediately to spread the sealant against the surface to give it a smooth finish. For additional information please consult the corresponding product data sheets.


Not for use in stoves, fireplaces or other areas   routinely exposed to high heat or flames, recommended only for use in passive fire containment systems. Do not allow product to freeze. An uncured sealant may irritate eyes, respiratory system and skin. In case of direct contact, rinse immediately with water. It is recommended to use the product only in a well-ventilated place. Do not ingest. Keep out of reach of children.

Storage & Shelf-Life:

12 months in unopened packaging in a dry and cool storage place, at temperature +30°C or below.


Sr. No Volume Packaging Type
1. 280ml Cartridge
2. 600ml Sausage
3. 200Ltr Drum
Marhaba       مرحبا

Welcome to Al Muqarram. Nice to meet you. Speak to SABA or MARK for your inquires.