CPVC
Orange Cement

Dolphin Orange CPVC Cement  medium-bodied orange cement for bonding all schedules and classes of CPVC pipes and fittings up to 6” diameter with an interference fit. For Residential and commercial hot and cold-water system, up to 200°F / 93°C. Recommended application temperature 40°F to 110°F / 4°C to 43°C.

TDS  |  MSDS

 

Description

Advantages

  • One-Part Application
  • Brush in Can
  • Rapid Curing
  • Strong and Durable Bonding
  • To bond Drinking water pipes
  • Meets BS & ASTM standards
  • Easy to use

Storage

12 months in unopened packaging in a dry and cool storage place, at a temperature 30°C or below. Do not store in direct sunlight. Do not thin.

Instructions

Application Instructions

  • Cut CPVC pipe in right angles chamfer outside at 15° angle and smoothen rough edges
  • Insert pipe in the fitting and mark depth.? Thoroughly clean both surfaces using Acetone solvent and tissue paper
  • Stir the adhesive well before application
  • Apply a uniform layer of adhesive in an axial direction using a brush with a thin layer on the fitting and thicker layer on the pipe
  • Put the parts together within 4 minutes (at 23°C) without turning and hold them firmly for a few seconds
  • Wipe off excess adhesive immediately
  • Allow the assembled joint to settle for 5 minutes (15 min. if temp. is below 10°C)
  • For better results, use assembled pipe after one hour
  • After full curing, allow free flow of water through the pipe for a few minutes to rinse it before use.

Safety Instructions

The product is flammable, keep it away from Heat, Flame, Spark or any other igniting source. Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

CAUTION: Flammable; Keep away from fire.

DO NOT USE EMPTY CONTAINER FOR STORING FOODSTUFF.
KEEP OUT OF REACH OF CHILDREN

Packaging

Sr. NoVolumePackaging Type
1.118mlInner Coated Tin Can
2.237mlInner Coated Tin Can
3.476mlInner Coated Tin Can
4.946mlInner Coated Tin Can

Description

Advantages

  • One-Part Application
  • Brush in Can
  • Rapid Curing
  • Strong and Durable Bonding
  • To bond Drinking water pipes
  • Meets BS & ASTM standards
  • Easy to use

Storage

12 months in unopened packaging in a dry and cool storage place, at a temperature 30°C or below. Do not store in direct sunlight. Do not thin.

Instructions

Application Instructions

  • Cut CPVC pipe in right angles chamfer outside at 15° angle and smoothen rough edges
  • Insert pipe in the fitting and mark depth.? Thoroughly clean both surfaces using Acetone solvent and tissue paper
  • Stir the adhesive well before application
  • Apply a uniform layer of adhesive in an axial direction using a brush with a thin layer on the fitting and thicker layer on the pipe
  • Put the parts together within 4 minutes (at 23°C) without turning and hold them firmly for a few seconds
  • Wipe off excess adhesive immediately
  • Allow the assembled joint to settle for 5 minutes (15 min. if temp. is below 10°C)
  • For better results, use assembled pipe after one hour
  • After full curing, allow free flow of water through the pipe for a few minutes to rinse it before use.

Safety Instructions

The product is flammable, keep it away from Heat, Flame, Spark or any other igniting source. Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

CAUTION: Flammable; Keep away from fire.

DO NOT USE EMPTY CONTAINER FOR STORING FOODSTUFF.
KEEP OUT OF REACH OF CHILDREN

Packaging

Sr. NoVolumePackaging Type
1.118mlInner Coated Tin Can
2.237mlInner Coated Tin Can
3.476mlInner Coated Tin Can
4.946mlInner Coated Tin Can