Epoxy Syringe Ultra Strong Adhesive

Application instruction:

• Remove cap from the plunger. Do not twist. Break the safety seal of syringe.
• Hold syringe upside down and snap the plunger from the end to make sure the air bubbles rise to the top. Ensure even dispensing by slowly releasing the plunger till the resin and accelerator are at the tip.
• Dispense even amounts of resin and accelerator on to the clean surface. The package blister can be
  used as mixing tray.
• Mix homogenously for 20 sec until the mixture is uniform. Use within 3-4 mins.
• Apply to the surface and clamp for 30 mins.
• After use pull the syringe back, wipe the syringe tips with clean dry cloth and align the tips. Place
  the cap back to the plunger and wait for the snap sound to ensure the tight closure of cap.
  *Not recommended for Polyethylene Plastic (PE), Polypropylene Plastic (PPE), Nylon, and other highly
  flexible materials and non-porous surfaces.

Typical Uses:

• Interior & exterior application
• Excellent bonding to common substrate such as metal/wood/ceramic/glass/plastic*/leather/stone etc.
• Excellent engineering adhesive in automobile industry
• Crafts and outdoor equipment

KEY FEATURES:

• Easy to use
• 100% Non-volatile product
• Rapid setting/curing
• Syringe allows convenient 1:1 dosing
• No Shrinkage
• Non-corrosive & non-stain
• DIY Product

Storage & Shelf Life:

When stored in original unopened container at or below 77°F (25°C) in dry warehouse conditions, Dolphin Power Bond Epoxy Ultra Strong adhesive in syringe type has a shelf life of 12 months from manufacturing date. After use pull the syringe back, wipe the syringe tips with clean dry cloth and align the tips. Place the cap back to the plunger and wait for the snap sound to ensure the tight closure of cap.