Dolphin CPVC medium-bodied orange cement for bonding all schedules and classes of CPVC pipes and fittings up to 6” diameter with an interference fit. For Residential and commercial hot and cold-water system, up to 200°F / 93°C. Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Brush in Can
Strong and Durable Bonding
To bond Drinking water pipes
Meets BS & ASTM standards
Easy to use
Cut CPVC pipe in right angles chamfer outside at 15° angle and smoothen rough edges
Insert pipe in the fitting and mark depth.? Thoroughly clean both surfaces using Acetone solvent and tissue paper
Stir the adhesive well before application
Apply a uniform layer of adhesive in an axial direction using a brush with a thin layer on the fitting and thicker layer on the pipe
Put the parts together within 4 minutes (at 23°C) without turning and hold them firmly for a few seconds
Wipe off excess adhesive immediately
Allow the assembled joint to settle for 5 minutes (15 min. if temp. is below 10°C)
For better results, use assembled pipe after one hour
After full curing, allow free flow of water through the pipe for a few minutes to rinse it before use.
Storage & Shelf-Life:
12 months in unopened packaging in a dry and cool storage place, at a temperature 30°C or below. Do not store in direct sunlight. Do not thin.
The product is flammable, keep it away from Heat, Flame, Spark or any other igniting source. Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.
CAUTION: Flammable; Keep away from fire.
DO NOT USE EMPTY CONTAINER FOR STORING FOODSTUFF.
KEEP OUT OF REACH OF CHILDREN
|Sr. No||Volume||Packaging Type|
|1.||118ml||Inner Coated Tin Can|
|2.||237ml||Inner Coated Tin Can|
|3.||476ml||Inner Coated Tin Can|
|4.||946ml||Inner Coated Tin Can|