Dolphin – 30-36 Duct Canvas Coating

dolphin 30-36 Duct Canvas Coating - 25 KG

Dolphin – 30-36 Duct Canvas Coating

DOLPHIN 30-36 is a single-component Duct Canvas Coating with high strength; flexible adhesive and sealant which forms a durable seal against air/water leakage. Due to its excellent water and UV abrasion-resistance, it can be used in an indoor and outdoor thermal insulation system.

TDS   |    MSDS


Advantages:


– Super Adhesion and High-strength
– Non-Toxic & Non- Flammable
– UV resistance
– Chemical Resistance
– Anti-Bacterial
– Ideal for hot & humid climatic conditions
– High-Temperature Resistance
– The coating is washable with mild soap
– Easy to apply

Application Area:


  • Protective indoor lag coating
  • Finishing the insulation materials in combination with reinforcing fabric (e.g. canvas cloth on air conditioning ducts)
  • Coating the cold-water pipes
  • Coating on Polystyrene or Polyurethane foam
  • Coating to the joints or edges of fibrous duct liner insulations to seal and prevent air leakage

Application Instructions:


Application surface should be dry and dust, rust, and grease-free. Apply a tack coat of DOLPHIN 30-36 at 3 to 3.5 m²/litre. After applying tack coat immediately embed the selected lagging fabric smoothly in to the wet coating. Apply two finishing coat of DOLPHIN 30-36 at 4 to 5 m²/litre. It is recommended to ensure that each coat of DOLPHIN 30-36 completely cured before the next coat is applied. The dry film thickness will vary with fabric to fabric.

Storage & Shelf-Life:


12 months from the manufacturing date if stored in a dry and cool storage place, at temperature 30°C or below.

Precautions:


Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

Packaging:


Sr. NoVolumePackaging Type
1.5kgBucket
2.10kgBucket
3.25kgBucket
4.200 LtrDrum

dolphin 30-36 Duct Canvas Coating - 25 KG

Advantages:


– Super Adhesion and High-strength
– Non-Toxic & Non- Flammable
– UV resistance
– Chemical Resistance
– Anti-Bacterial
– Ideal for hot & humid climatic conditions
– High-Temperature Resistance
– The coating is washable with mild soap
– Easy to apply

Application Area:


  • Protective indoor lag coating
  • Finishing the insulation materials in combination with reinforcing fabric (e.g. canvas cloth on air conditioning ducts)
  • Coating the cold-water pipes
  • Coating on Polystyrene or Polyurethane foam
  • Coating to the joints or edges of fibrous duct liner insulations to seal and prevent air leakage

Application Instructions:


Application surface should be dry and dust, rust, and grease-free. Apply a tack coat of DOLPHIN 30-36 at 3 to 3.5 m²/litre. After applying tack coat immediately embed the selected lagging fabric smoothly in to the wet coating. Apply two finishing coat of DOLPHIN 30-36 at 4 to 5 m²/litre. It is recommended to ensure that each coat of DOLPHIN 30-36 completely cured before the next coat is applied. The dry film thickness will vary with fabric to fabric.

Storage & Shelf-Life:


12 months from the manufacturing date if stored in a dry and cool storage place, at temperature 30°C or below.

Precautions:


Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

Packaging:


Sr. NoVolumePackaging Type
1.5kgBucket
2.10kgBucket
3.25kgBucket
4.200 LtrDrum

Additional information
Industries Solution

General Purpose, Hvac

×