Dolphin – UPVC Cement

Dolphin – UPVC Cement

Dolphin UPVC medium-bodied Clear cement for bonding all schedules and classes of UPVC pipes and fittings up to 4” diameter with an interference fit. Recommended for potable water, pressure pipe, conduit DWV. Recommended application temperature 40°F to 110°F / 4°C to 43°C.

TDS  |   MSDS


Advantages:


  • – One-part application
  • – Brush in Can
  • – Rapid curing
  • – Strong and durable bonding
  • – Meets BS & ASTM standards
  • – Easy to use

Application Instructions:


  1. Cut UPVC pipe in right angles chamfer outside at 15° angle and smoothen rough edges
  2. Insert pipe in the fitting and mark depth. Thoroughly clean both surfaces using Acetone solvent and tissue paper
  3. Stir the adhesive well before application
  4. Apply a uniform layer of adhesive in an axial direction using a brush with a thin layer on the fitting and thicker layer on the pipe
  5. Put the parts together within 4 minutes (at 23°C) without turning and hold them firmly for a few seconds
  6. Wipe off excess adhesive immediately
  7. Allow the assembled joint to settle for 5 minutes (15 min. if temp. is below 10°C)
  8. For better results, use assembled pipe after one hour
  9. After full curing, allow free flow of water through the pipe for a few minutes to rinse it before use

Storage & Shelf-Life:


12 months in unopened packaging in a dry and cool storage place, at a temperature 30°C or below. Do not store in direct sunlight. Do not thin.

Safety Instructions:


The product is flammable, keep it away from Heat, Flame, Spark or any other igniting source. Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

CAUTION: Flammable; Keep away from fire.

DO NOT USE EMPTY CONTAINER FOR STORING FOODSTUFF.

KEEP OUT OF REACH OF CHILDREN

Packaging:


Sr. NoVolumePackaging Type
1.118mlInner Coated Tin Can
2.237mlInner Coated Tin Can
3.476mlInner Coated Tin Can
4.946mlInner Coated Tin Can

Advantages:


  • – One-part application
  • – Brush in Can
  • – Rapid curing
  • – Strong and durable bonding
  • – Meets BS & ASTM standards
  • – Easy to use

Application Instructions:


  1. Cut UPVC pipe in right angles chamfer outside at 15° angle and smoothen rough edges
  2. Insert pipe in the fitting and mark depth. Thoroughly clean both surfaces using Acetone solvent and tissue paper
  3. Stir the adhesive well before application
  4. Apply a uniform layer of adhesive in an axial direction using a brush with a thin layer on the fitting and thicker layer on the pipe
  5. Put the parts together within 4 minutes (at 23°C) without turning and hold them firmly for a few seconds
  6. Wipe off excess adhesive immediately
  7. Allow the assembled joint to settle for 5 minutes (15 min. if temp. is below 10°C)
  8. For better results, use assembled pipe after one hour
  9. After full curing, allow free flow of water through the pipe for a few minutes to rinse it before use

Storage & Shelf-Life:


12 months in unopened packaging in a dry and cool storage place, at a temperature 30°C or below. Do not store in direct sunlight. Do not thin.

Safety Instructions:


The product is flammable, keep it away from Heat, Flame, Spark or any other igniting source. Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. Do not ingest. Keep out of reach of children.

CAUTION: Flammable; Keep away from fire.

DO NOT USE EMPTY CONTAINER FOR STORING FOODSTUFF.

KEEP OUT OF REACH OF CHILDREN

Packaging:


Sr. NoVolumePackaging Type
1.118mlInner Coated Tin Can
2.237mlInner Coated Tin Can
3.476mlInner Coated Tin Can
4.946mlInner Coated Tin Can

Additional information
Industries Solution

Flooring, General Purpose, Sanitary