– Instant Tack (10 Sec)
– Water Resistant
– Paintable once cured
– Solvent Rubber Base
– Cures quickly
– Not Suitable for use in mirror and Styrofoam. For additional information please consult the corresponding product data sheets.
2-Way application for an immediate and strong bonding
– Press firmly over entire surfaces to transfer adhesive and then pull both surfaces apart
– Allow to tack off (approx..3-5 minutes), re-position if necessary and press together. Contact areas should be firmly push together. Stressed panels may require temporary mechanical fastening as maximum bond strength may take from 12-24 hours
Apply using 1-way method for heavier panels or those subject to stress loading on the bond line
– Apply adhesive to one surface, bring surface together and clamp in a fashion that maintains maximum surface contact at the bonding surfaces.
Use protective gloves, glasses and face protectant while applying. It is recommended to use the product only in a well-ventilated place. In the case of direct contact, rinse immediately with water. All potential source of ignition must be eliminated both in/or near the work area. Do not ingest. Keep out of reach of children.
18 months in unopened packaging in a dry and cool storage place, at temperature 30°C or below. Once opened, any leftover product must be used within 6 months. Do not store in direct sunlight.