Dolphin PIR Adhesive

DOLPHIN PIR Contact Adhesive based on SBS Polymer. Dolphin PIR bonding with varieties of foams and metal substrates in pre insulated duct system.

PREPARATION

All surface must be clean, dry and free from dust, paint, loose material, oil, grease, sealers, curing compounds, waxes and all contaminations. Apply adhesive evenly with any suitable equipment to uniform coat on both surface. Allow solvent to evaporate completely and then assemble the surface by applying normal hand pressure to give strong bond. Do not leave any air bubble on both applied surface.

Application

• Can be used in wide varieties of foams and metal substrates. 

• Recommended for HVAC applications. 

• Under deck insulation

• Duct insulation (nitryl rubber to metal)  

Application instruction

ADVANTAGE 

• Safe and suitable for use on PIR foam and fiber glass to metal. 
• Free from benzene, xylene and ethyl acetate. It doesn’t contain harmful solvent. 
• Applied easily by roll, brush or spray.
• Good resistance to ageing.
• High initial tack/green strength. 

Storage and Shelf life

Not Available

Packing

Application Video

Dolphin PIR Adhesive is available in 3 Liter can, 5 Liter can and 20 Liter pails.

Not Available

Newsletter Signup

Product Search

Distribution
Network

Enquiry Form