Dolphin Duct Canvas Coating 30-36

DOLPHIN 30-36 is a one-component Duct Canvas Coating with tough and flexible adhesive and sealant forming a durable seal against air leakage. Due to its excellent water and UV abrasion-resistance, it can be used in outdoors as well as indoors in thermal insulation system on metal duct. 



•Good adhesion and high strength 

•Water resistant can be washed with ild soap.  

•Non-toxic & non- flammable.

•UV resistance.

•Chemical resistance and Antibacterial.

•Suitable to Middle East climatic conditions. 

•High temperature resistance. 

•Applied easily by brush, roll and spray.



•Protective indoor lag coating

•Finish for insulation materials in combination with reinforcing fabric (e.g. canvas cloth on air conditioning ducts) and cold water piping. 

•Allows the application on Polystyrene or Polyurethane foam 

•Application to the joint or edges of fibrous duct liner insulations to seal and prevent air erosion.

Application instruction


The surface should be clean, dry and free from oil, grease and loose particles. Apply a tack coat of DOLPHIN 30-36 at 3 to 3.5 m2 per liter. After applying tack coat immediately imbed the selected lagging fabric smoothly in to the wet coating. Apply two finish coat of DOLPHIN 30-36 at rate of 4 to 5 m 2 per liter.It is very important to ensure that each coat of DOLPHIN 30-36 totally cured before the next coat is applied. The dry film thickness will vary with fabric selected.  

Storage and Shelf life

Not available


Application Video

DOLPHIN 30-36 is available in 25 kg air tight Plastic Pail and 4 kg Plastic Bucket.

Not available

Newsletter Signup

Product Search


Enquiry Form